What We Do

Services

Every service below covers the materials and steps involved, not just a one-line label.

Home › Services

Everything we take on

Every job below is one we do ourselves across Oro Valley.

Deck Installation

We frame new decks with pressure-treated joists on concrete footings set below where the ground moves, then deck over them in wood or composite. Ledger boards get through-bolted and flashed so monsoon rain can't work its way behind them.

Deck Repair

Soft or spongy boards, sinking posts and loose stair stringers are the three calls we get the most. We replace what's actually failed instead of resurfacing over a rotten joist, which just hides the problem for another season.

Deck Staining & Sealing

Arizona sun breaks down an unsealed deck fast, graying the wood and opening cracks that collect water. We strip the old finish, let the boards dry out fully, then apply a UV-rated stain or sealer that actually holds up through a summer.

Custom Deck Design

If you want a multi-level deck, a built-in bench, or a layout that works around an existing mesquite tree, we'll draw it up before we touch lumber. We'll also tell you if an idea won't hold up structurally before you pay for it.

Composite Decking Installation

Composite boards don't need restaining and they handle our heat without splitting, but they still expand and contract, so spacing and fastener choice matter more than with wood. We leave the manufacturer's gap at every board end and use hidden fasteners so the surface stays flat.

Deck Railing Repair & Installation

A wobbly railing usually means the post itself has rotted or the lag bolts backed out, not just a loose balluster. We reset posts into the framing with structural screws and build to the guardrail height code actually requires.

Deck Resurfacing & Board Replacement

If your framing is still sound but the decking itself is cracked, splintering or faded past saving, we can pull the old boards and redeck the existing structure. It costs less than a full rebuild and takes a few days instead of a few weeks.

Deck Structural Inspection & Repair

Before you list a house or host a big party, we'll check the ledger connection, joist condition and footing stability and tell you plainly what needs fixing now versus what can wait. We'll put it in writing, not just a verbal 'looks fine.'

Pergolas & Shade Structures

A lot of Oro Valley decks need shade more than they need more square footage, so we build pergolas and shade structures that attach into the existing deck framing. We size the rafters for wind load, not just looks.

Multi-Level Deck Construction

Sloped lots around the foothills often call for a deck that steps down in two or three levels instead of one flat platform. We tie each level's framing back to its own footings so settling on one section doesn't rack the whole structure.

How It Works

Four steps, and no surprises in any of them.

01

We come and look

You tell us what you want doing, we look at what is actually there, and we ask the awkward questions early.

02

You get a price

In writing, itemised, free. If something might add cost later we flag it now rather than at the end.

03

We do the work

Same crew throughout. We cover your floors, keep the dust down and tidy up before we leave each day.

04

We walk it with you

You point out anything you are not happy with and we fix it before the invoice, not after.

Where We Work

All of this, across Oro Valley, AZ

Deck installation, repair and staining calls come in from all over the following towns.

Oro Valley, AZ
Tucson, AZ
Marana, AZ
Sahuarita, AZ
Catalina Foothills, AZ
Vail, AZ
Catalina, AZ
SaddleBrooke, AZ
Green Valley, AZ
Picture Rocks, AZ
Tortolita, AZ
Common Questions

Things worth asking

Questions that come up once an actual deck project is underway.

Do I need a permit to build a deck in Oro Valley?
Most decks attached to a house and more than 30 inches off the ground require a building permit through Pima County or the Town of Oro Valley, covering footing depth, guardrail height and stair design. Freestanding decks under a certain height and size sometimes qualify for exemptions, but that should be confirmed before assuming one isn't needed.
How long does it take to build a deck?
A straightforward single-level deck usually takes one to two weeks from the first footing to the final board, while multi-level designs or decks with custom railing and built-ins can run three to four weeks. Permit approval time and weather delays are on top of that build window.
Can a deck be built on a tight budget?
Pressure-treated pine with a standard railing design costs considerably less than composite decking with cable or glass railing, and square footage can be adjusted to fit a target number. Pricing a few options side by side is the honest approach, rather than cutting corners on footings or framing to hit a number.
What kind of guarantee comes with deck work?
Workmanship on framing, footings and railing connections is typically covered for a set period after completion, separate from manufacturer warranties on decking material or hardware, which usually run longer. The specifics should be written into the contract, not left as a verbal promise.
Who handles questions once a deck project is underway?
One point of contact should handle scheduling, change orders and questions throughout the project, rather than switching between different people depending on the day. That person should be reachable by phone for anything that comes up mid-build.
What decking materials are commonly used?
Pressure-treated pine, cedar, and composite brands like Trex and TimberTech are the three most common choices, each with different upfront cost, maintenance and lifespan in full Arizona sun. Composite costs more initially but skips the restaining cycle wood decking needs every two to three years here.
Can the yard still be used while a deck is being built?
Partial access to the yard is usually possible, though the immediate work area needs to stay clear for safety and material staging, especially during the footing and framing stages. Pets should be kept away from open post holes and exposed rebar until framing is complete.
What should be done to prepare a site before a deck build starts?
Clearing furniture, grills and planters off the existing deck or patio area, and making sure there's clear access for equipment through a gate or side yard, speeds up the first day significantly. Marking the location of any buried sprinkler lines or utilities near the footing locations also helps avoid delays.
What happens if rot or damage is found once an old deck is torn out?
If a ledger board, rim joist or support post turns out to be more damaged than it looked from the surface, that gets flagged with photos and a revised quote before further work continues. Most contracts include a contingency for exactly this, since the full extent of rot isn't always visible until boards come off.
How should a new deck be maintained once it's finished?
Wood decking needs restaining or resealing roughly every two to three years in direct Arizona sun to keep it from graying and cracking, while composite decking just needs periodic washing to clear dust and debris. Checking railing connections and footing areas once a year for movement catches small problems before they become structural ones.

Not sure what you need?

Describe the problem and we will tell you what it probably is. No obligation.

Call (520) 335-9770